SCALE-UP  Test Kit

Find your ideal depth filter at an early stage of your product development. The Test-Kit contains 10 different PURASPIN® for 20 mL trials, a 2″ capsule with a selection of filter sheets for verification and the necessary information for a proper scale-up calculation.

PURASPIN® Test Kit

Contains 5 different filter sheet types for laboratory filtration tests for coarse filtration, fine filtration, clarifying filtration and sterile filtration. A practical and easy-to-use tool to define the right filtration solution at an early stage in the development process.

ACTIVASORB® Test Kit

Contains 6 different activated carbon ACTIVASORB® sheet types for different requirements and applications. Also included is a filter capsule into which the filter sheets and filter paper are inserted and the capsule holder, which holds all components for the filtration tests together.

LIBRASORB® TX and MX Test Kit for Wine

LIBRASORB® TX and MX filter sheets offer a clear solution in removing undesireable aromas, improving the organoleptic aspects and thus adding value to the final product. The treatment of beverages with LIBRASORB® TX allows to reduce TCA and TBA levels below the flavor threshold while fully preserving the aroma profile. MX removes moldy and brettanomyces off-flavors. Use the lab-scale TX and MX test kit in order to test and verify the effectiveness on your beverage. The Test Kit includes a 2″ TX or MX filter capsule with connection hose and a syringe.

PURASPIN® Centrifuge filter

PURASPIN® enables you to quickly and efficiently test different depth filters or quickly purify a small amount of liquid. To do so, insert the filters into the standard 50 mL centrifuge tubes (Labcon® SuperClear® 50 mL tubes). Then, filter the liquid using a centrifuge or vacuum.

► More about PURASPIN®

PURACAP® 2″ Capsule

Lab filter for filtration method development. The purpose of the mini capsule lab filter is to have a tool to find the best filtration solution for a given application to determine the data needed for a proper scale-up. This procedure determines the grade of the filter sheet to clarify liquids containing undesired particles. The mini capsule holds a maximum pressure of 2.5 bar (36 psi) or 2.0 bar (29 psi) for alcoholic solutions at 25°C (77°F).

PURACAP® BIO SD 2″ Capsule

Lab filter for microfiltration testing for biopharmaceutical liquids at laboratory scale. This procedure is designed to determine the dosage and grade of filter aid, to clarify a cell broth or cell lysate. The proper amount of filter aid depends on the concentration of solids in the feedstock. Solids and filter aid firm a filter cake which has a height limitation due to the design (geometry) of the filter capsule.

This 2″ BIO SD single use lab  filter capsule is designed to hold a maximum pressure of 2.5 bar (36 psi) , respectively 2.0 bar (29 psi) for alcoholic solutions at 25 °C (77 °F).

PURACAP®BIO SD 5″ Capsule

Lab filter for microfiltration testing of biopharmaceutical liquids at laboratory scale or for filtration of small batches. The 5″ capsule is designed to determine the dosage and grade of filter aid, to clarify a cell broth or cell lysate. The proper amount of filter aid depends on the concentration of solids in the feedstock. Solids and filter aid firm a filter cake which has a height limitation due to the design (geometry) of the filter capsule.

The BIO SD 5″ single use capsule is designed to hold a maximum pressure of 2.5 bar (36 psi) at 25 °C (77 °F).

LABTROX 60A

Stainless steel lab filter for sheet filtration. For filtration experiments and the development of new filtration applications used in
the laboratory scale. Any FILTROX depth filter sheet with a diameter of 60 mm can be installed in the filter holder. The holder, made of
stainless steel 316L, is also suitable for critical liquids.

LABTROX 60B

Stainless steel lab filter for alluvial filtration. For filtration experiments and the development of new filtration applications used in the laboratory scale. Any FILTROX depth filter sheet with a diameter of 60 mm can be installed in the filter holder. The holder, made of stainless steel 316L, is also suitable for critical liquids.